![Britax One4Life All-in-One Car Seat, 10 Years of Use from 5 to 120 Pounds, Converts from Rear-Facing Infant Car Seat to Forwa]({"https://m.media-amazon.com/images/I/71vjdopz3PL._AC_SS115_.jpg":[115,115],"https://m.media-amazon.com/images/I/71vjdopz3PL._AC_SS230_.jpg":[230,230],"https://m.media-amazon.com/images/I/71vjdopz3PL._AC_SS345_.jpg":[345,345]})
![Britax Grow with You ClickTight Harness-2-Booster Car Seat, 2-in-1 High Back Booster, Black Contour]({"https://m.media-amazon.com/images/I/81oZKmSGy1L._AC_SS115_.jpg":[115,115],"https://m.media-amazon.com/images/I/81oZKmSGy1L._AC_SS230_.jpg":[230,230],"https://m.media-amazon.com/images/I/81oZKmSGy1L._AC_SS345_.jpg":[345,345]})
![Britax One4Life Slim All-in-One Car Seat, 10 Years of Use, 17.5” SpaceSaver Design, Converts from Rear-Facing Infant Car Seat]({"https://m.media-amazon.com/images/I/817jgFKjnlL._AC_SS115_.jpg":[115,115],"https://m.media-amazon.com/images/I/817jgFKjnlL._AC_SS230_.jpg":[230,230],"https://m.media-amazon.com/images/I/817jgFKjnlL._AC_SS345_.jpg":[345,345]})
I’ve been using this seat for about 1.5 years with my 2 year old toddler and just purchased another for my 3 month old because I love it so much.
The click tight installation makes it a breeze to get a tight installation. The access for this is 2 buttons on the bottom of the seat that you press together to lift up the seat to thread the belt. It does have latch but since Britax recommends belt install I have never used or attempted with latch. Thread the belt, buckle, remove any slack and then press the seat back down until it clicks. For a tight install, I find I have to remove enough slack from the belt that I have to kind of kneel on the seat to have it click back into place. In doing this, the seat doesn’t budge at all.
As far as comfort goes, my son never seems to be uncomfortable and there appears to be plenty of padding. My 13 lb 3-month old uses the infant insert and the padding is quite thick. The cup holders are excellent. I’ve yet to find a standard 12-oz kids water bottle that doesn’t fit. They easily remove for washing. I recently took all the seat fabric off to wash. It washed and dried wonderfully following the instructions and I didn’t even need a YouTube video to replace the fabric which was a first.
This is not a slim fit or lightweight seat. If you frequently need to switch it to a different car, it probably is not the seat for you. While it removes and reinstalls easily, it is quite heavy and cumbersome to move around. I could fit 3 of these across in my expedition with a bench seat, but in a smaller vehicle like my outback, 2 could definitely fit in the outboard seats but an adult would definitely struggle to fit in between. The seat however feels like a tank and this was a big factor in purchasing a second for my infant.
The seat adjusts very easily as my son has grown. The straps easily adjust by moving up the headrest. The tension on the straps easily adjusts by pulling the strap at the leg portion of the seat and releasing by pressing a button below the click tight and pulling the straps. I should add that my son is very tall for his age and has plenty of legroom while rear facing.
I don’t have any review of the forward facing functions and adjustments for this seat but have no doubt it will be just as easy to adjust as rear facing.
| Brand | Britax |
| Installation Type | Seat Belt |
| Material | Alloy Steel |
| Color | Cool Flow Teal [New Version] |
| Orientation | Forward and Rear Facing |
