Features
- Dimming type: Reverse phase.
- Dimming note: Dimming ranges from 100 to less than or equal to 20 percent depending on dimmer control.
- Operating temperature: -20C (-4F) to a maximum of +45C (+113F).
- RoHS compliant: Yes.
Product Dimensions
Details
- Bulb Included
- Yes
- Bulb Type
- LED
- Wattage
- 4.5 Watt
- Material
- Glass
- Bulb Base
- E26/Medium (Standard)
- Dimmable
- Yes
- Edison Bulb Type
- Yes
- Dry, Damp or Wet Location Rated
- Wet
- What is Dry, Damp or Wet Location Rated?
- This indicates whether the fixture is safe to use in dry locations, damp locations (moist environments), or wet locations (direct exposure to water).
- Mercury Free
- Yes
- Color Temperature Options
- Warm White
- Color Temperature
- 2,700K
- Beam Angle
- 180 degrees
- Light Bulb Shape
- Globe
- Imported
- Yes
- Color Rendering Index
- 80
- Voltage
- 120 Volt
- Maximum Voltage
- 120 Volt
- Bulb Brightness
- 450lm
- Rated Bulb Life
- 15,000 hours
- Number of Bulbs Included
- 6
- Bulb Shape Code
- G25
- Incandescent Equivalent Wattage
- 40 Watt
Warranty
- Commercial Warranty
- Yes
- Product Warranty
- Yes
- Full or Limited Warranty
- Limited
- Warranty Length
- 3 Years
- Warranty Details 2
- LED bulb’s warranty and product life statements are based on operating the LED lamp in environments with an ambient temperature of -20° C (-4° F) to a maximum of +45° C (113° F) and are warranted for 3 years, based on 3 hours of use per day – unless otherwise noted on the product's packaging. Average rated life may vary depending on the application, use, fixture type, and environment. Not for use in vapor tight or sealed Jelly Jar type fixtures. LED replacements lamps are not compatible with all photocells, timers, and motion sensors and these devices can affect the performance of the products. Only LED-rated devices should be used and if not, the warranty can be voided. This limited warranty covers all defects encountered in normal and recommended use of the product, and does not apply to cases below: Loss or damage to the product due to abuse, mishandling, alteration, accident, electrical current fluctuation, failure to follow operating, maintenance, or environmental instructions prescribed by SATCO. See safety notices in or on the product packaging. Service provided by someone other than SATCO or an authorized service provider. Warranty is void if a product is not used for the intention of which product was manufactured.
- Warranty Details
- All the following will void the warranty: Failure to follow recommended care and installation will void product warranty Consumer misuse is not covered Normal wear and tear are not covered – lightbulbs and integrated light modules have a limited lifespan Manufacturing defects are covered by warranty.
